Skip to content
CurveScout

CURVESCOUT / MOTORCYCLE RIDE

Corbulo's canal | Vlietvoorde and Mill Network at Kinderdijk-Elshout starting at Voorschoten

Plan this ride

Recorded distance
107 km
Riding-time estimate
2 h 05
Journey
Recorded itinerary
Distance and timing basis

Ordered leg totals agree within rounding. Stop distances are approximate sums of rounded legs. Stops, delays, approach and any separate return travel add time. Basis: producer-declared routed record.

Reading history stays on this device. My road watch requires a separate selection; opening it does not subscribe this ride.

Distance and riding time are measured on the routed road. Check local closures and conditions before you ride.

Open this ride in CurveScout

Why this ride

107 km from Voorschoten to Voorschoten, about 2 h 05 of riding. On the way it passes Van Nellefabriek, Mill Network at Kinderdijk-Elshout and back through Van Nellefabriek.

Scenic road chapters

Zeeland Delta Works Route

Expect company on a summer weekend. Early is better than fast. For about 28 km this is Zeeland Delta Works Route, a road with a name of its own and a reason for it.

Chapter facts
Length
28 km
Named road
Zeeland Delta Works Route

Waypoint introductions and full write-ups

  1. 1. Corbulo's canal | Vlietvoorde

    A straight line on a Dutch map is nearly always a canal, and this one is two thousand years old. The Fossa Corbulonis, or Corbulo's canal, was dug in AD 47 by Roman soldiers under the general Gnaeus Domitius Corbulo, to link the Rhine with the Meuse and give supply ships a safe route that avoided the open sea. It ran through the dunes and marsh of what is now South Holland, and today the line of the Vliet, the canal between Leiden and Delft, follows part of it. Corbulo, so the story goes, dug it to keep his idle legions busy, and the emperor Claudius called his troops back from beyond the Rhine soon afterwards. Vlietvoorde, near Voorschoten, is one of the places where the route can be traced, and the site is part of the Lower German Limes, which won World Heritage status in 2021.

    Read the complete Corbulo's canal | Vlietvoorde write-up.

    Recorded stop-planning note

    May refer to an earlier itinerary; verify against your selected route before riding.

    Planning note

    Corbulo's canal | Vlietvoorde is where the day begins. Next is Van Nellefabriek.

  2. 2. Van Nellefabriek

    The Van Nelle factory, on the edge of Rotterdam, is one of the most beautiful industrial buildings ever made. Built between 1925 and 1931 for a company that processed coffee, tea and tobacco, it is a long, light building of glass and steel, with curtain walls that let daylight flood into the workspaces. The designers, Johannes Brinkman and Leendert van der Vlugt, created what became an icon of modernist architecture, a factory of light and air for its workers. It was added to the UNESCO list in 2014.

    Read the complete Van Nellefabriek write-up.

    Recorded stop-planning note

    May refer to an earlier itinerary; verify against your selected route before riding.

    Planning note

    Van Nellefabriek comes up about 28 km into the recorded legs. Next is Mill Network at Kinderdijk-Elshout.

  3. 3. Mill Network at Kinderdijk-Elshout

    Nineteen windmills stand in two rows along the canals at Kinderdijk, their sails turning slowly against the wide Dutch sky, and it is one of the most iconic sights in the Netherlands. They were built in the eighteenth century to pump water out of the Alblasserwaard, a low-lying polder between the rivers Lek and Noord, which would otherwise be flooded. Each mill lifted water from a lower canal to a higher one, and from there it was let out into the river. Over time steam, diesel and electric pumping stations took over the job, and the most recent ones still keep the polder dry today. The mill network was listed by UNESCO in 1997.

    Read the complete Mill Network at Kinderdijk-Elshout write-up.

    Recorded stop-planning note

    May refer to an earlier itinerary; verify against your selected route before riding.

    Planning note

    about 54 km into the recorded legs you reach Mill Network at Kinderdijk-Elshout. Next is back through Van Nellefabriek.

  4. 4. back through Van Nellefabriek

    Return visit. Read the place description above.

    Read the complete Van Nellefabriek write-up.

    Recorded stop-planning note

    May refer to an earlier itinerary; verify against your selected route before riding.

    Planning note

    back through Van Nellefabriek, late in the day. Next is Corbulo's canal | Vlietvoorde.

  5. 5. Corbulo's canal | Vlietvoorde

    Return visit. Read the place description above.

    Read the complete Corbulo's canal | Vlietvoorde write-up.

    Recorded stop-planning note

    May refer to an earlier itinerary; verify against your selected route before riding.

    Planning note

    Back at Corbulo's canal | Vlietvoorde. That is the ride.

Leg by leg

Corbulo's canal | Vlietvoorde to Van Nellefabriek

Corbulo's canal | Vlietvoorde → Van Nellefabriek is 28 km of rhythm rather than effort. Let it flow and let the view breathe.

Van Nellefabriek to Mill Network at Kinderdijk-Elshout

Van Nellefabriek → Mill Network at Kinderdijk-Elshout is 26 km of rhythm rather than effort. Let it flow and let the view breathe.

Mill Network at Kinderdijk-Elshout to back through Van Nellefabriek

Mill Network at Kinderdijk-Elshout → back through Van Nellefabriek is 26 km of rhythm rather than effort. Let it flow and let the view breathe.

back through Van Nellefabriek to Corbulo's canal | Vlietvoorde

back through Van Nellefabriek → Corbulo's canal | Vlietvoorde is 27 km of rhythm rather than effort. Let it flow and let the view breathe.

More motorcycle rides nearby